User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com

14.2.1 Algorithm: Weighted Balance

This setting specifies the ratio of WAN connection usage to be applied on the specified

IP protocol andport. This setting is applicable only when Algorithm is set to Weighted

Balance.

The amount of matching traffic that is distributed to a WAN connection is proportional to

the weight of the WAN connection relative to the total weight.Use the sliders to change

each WAN’s weight.

For example, with the following weight settings:

 Ethernet WAN1: 10

 Ethernet WAN2: 10

 Wi-Fi WAN: 10

 Cellular 1: 10

 Cellular 2: 10

 USB: 10

Total weight is 60 = (10 +10 + 10 + 10 + 10 + 10).

Matching traffic distributed to Ethernet WAN1 is 16.7% = (10 / 60 x 100%.

Matching traffic distributed to Ethernet WAN2 is 16.7% = (10 / 60) x 100%.

Matching traffic distributed to Wi-Fi WAN is 16.7% = (10 / 60) x 100%.

Matching traffic distributed to Cellular 1 is 16.7% = (10 / 60) x 100%.

Matching traffic distributed to Cellular 2 is 16.7% = (10 / 60) x 100%.

Matching traffic distributed to USB is 16.7% = (10 / 60) x 100%.