User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Product Description
- Using the Pepwave Devices
- Appendix:
- Federal Communication Commission Interference Statement
Pismolabs 101 mini
- 10 -
Copyright © 2009 Pepwave
Pismolabs 101 mini User Manual
In the field SSID under Wireless Settings, input the access point’s SSID (sometimes it is
called the “network name”). According to the setting of the Access Point you are
associating to, you may choose a different Authentication setting.
If Static WEP key or WPA/WPA2-Personal is selected for Authentication, input the
Encryption Key field as well. (There are also options of 802.1x with dynamic WEP key
and WPA/WPA2-Enterprise. You do not need to use these settings unless instructed to
do so by your ISP.)
Click the Save button at the bottom to complete.
You can now click the Connect link on the top bar and then click the Connect button to
associate with the access point.