User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Product Description
- Using the Pepwave Devices
- Appendix:
- Federal Communication Commission Interference Statement
Pismolabs 101 mini
- 15 -
Copyright © 2009 Pepwave
Pismolabs 101 mini User Manual
4.3.4 Wireless IP Settings
Illustration 7: Wireless IP Settings
Wireless IP Settings
IP Settings
The IP address can be obtained automatically or configured manually.
If you choose to manually configure the IP address for your unit,
enter the fields IP Address, Subnet Mask, Default Gateway, Preferred
DNS Server and Alternate DNS Server.
MTU Size
You may also set the MTU Size to increase the data packet size your
unit can handle at one time.
AP Settings
(Applicable to Pismolabs 101 mini AP Series)
The AP Settings will be covered in detail in the subsequent section
Integrated Wi-Fi Access Point Configuration.