User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Product Description
- Using the Pepwave Devices
- Appendix:
- Federal Communication Commission Interference Statement
Pismolabs 101 mini
- 16 -
Copyright © 2009 Pepwave
Pismolabs 101 mini User Manual
4.3.5 Restore and Reboot
Illustration 8: Restore and Reboot
Restore and Reboot
WAI Redirection
If the device is not connected to an access point, and the user is
accessing an Internet web site, the settings control whether to
redirect the web access to the web admin interface page or not. If
this is disabled and the device is not connected, the browser will show
a web access error message. The user can still access the web admin
interface by accessing to the device’s LAN IP address. By default, the
LAN IP address is set as http://192.168.20.1.
Web Password
Protection
Sets the password to protect the web user interface.
Restore Factory
Settings
To restore the device to default settings. When this option is clicked,
default settings will be restored and the unit will be restarted.
Reboot CPE To restart the device.