User's Manual
Table Of Contents
- Copyright
- Disclaimer
- Product Description
- Using the Pepwave Devices
- Appendix:
- Federal Communication Commission Interference Statement
Pismolabs 101 mini
- 26 -
Copyright © 2009 Pepwave
Pismolabs 101 mini User Manual
4.10 Restore to Default Settings
4.10.1 Pismolabs 101 mini Indoor Series
There are two ways to restore the Pismolabs 101 mini Indoor unit to default settings.
If you are able to access the web admin interface, go to the CPE Setup page, and click the
Restore and Reboot button.
Otherwise, you can also power up the unit and wait for about 1 min. Then press the Reset
Button at the rear side of the unit using a pin and then hold it for 5 seconds. The unit will
restore the settings to factory default and reboot.
Reset
Button