User's Manual
Table Of Contents
- User Manual
- Table of Contents
- 1 Copyright
- 2 Disclaimer
- 3 Product Description
- 4 Using the Pepwave Devices
- 5 CPE Settings Details
- 6 Port Forwarding
- 7 QoS
- 8 Firmware Upgrade
- 9 Debug and System information
- 10 Restore to Default Settings
- Appendix
- Table of Contents
http://www.pepwave.com 7 Copyright © 2011 Pepwave
User Manual
Pepwave PolePoint Series
3.3.2 Surf 400 Series
LED Color Status Description
Power
Green On Power is on
Off Power is off
Status
Green Solid Received signal is Excellent, Very Good and Good
Green Blinking Received signal is Low
Amber Blinking Received signal is Very Low
Amber Solid No wireless signal is detected
Off Booting up / Upgrading firmware
LAN
Green On Ethernet is connected
Green Blinking Sending/Receiving data
Off Ethernet is not connected
Wi-Fi
Green On Associated with an access point
Green Blinking Sending/Receiving data
Off Not associated with any access point
Signal Bars
Green N/A
The number of lit signal bars depends on the
strength of the received signal. A larger number of lit
signal bars indicate stronger signals.