User's Manual

Page 5
User Manual
3 Installation
3.1 Installation Procedures
1. Attach the antenna to the device.
2. Connect the LAN port on the unit with the backbone network using an Ethernet cable.
3. Connect the power adapter to the power connector of the unit, and then plug in the
power adapter.
4. Wait for the status LED to turn green.
5. Connect a PC to the backbone network, and configure the IP address of the PC to be
any IP address between 192.168.0.4 and 192.168.0.254, with subnet mask of
255.255.255.0.
6. With Microsoft Internet Explorer 6 or above, or Mozilla Firefox 2.0 or above, connect
to the URL https://192.168.0.3.
7. When prompted, enter the default admin login ID and password, admin and public
respectively.
8. After logging in, a Main Menu
page appears to facilitate
further configuration of the unit: