User Manual

USER MANUAL
Peplink Balance Series
http://www.peplink.com - 104 / 182 - Copyright © 2011 Peplink
16.1.1 Access Point Information
Access Point can be assigned with different AP Profiles created in section 16.5. Click Change AP Profile
on the Dashboard and the following will be shown.
If there is a “*” next to the channel information, that means the AP One is configured to select a
broadcasting channel automatically.
To apply a AP Profile, check the box(es) to choose the desired Pepwave AP device(s), and then choose
a desired AP Profile in the dropdown list under the devices list. Press Yes to confirm the change.
Once the change is confirmed, the new AP Profile will be applied to the selected device(s). Changes will
be activated immediately.
To view the device detail, click the corresponding device’s name and you will see the following screen.
Device’s Name, Location and Channel can be changed in here.