User Manual

USER MANUAL
Peplink Balance Series
http://www.peplink.com - 120 / 182 - Copyright © 2011 Peplink
Most modern wireless clients support v2. In the event that there are stations
that do not support v2, select the option v1.
By default, the value of the setting is v2.
Beacon Rate
This setting provides the option to send beacon in different transmit bit rate and
the bit rates are: 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 11Mbps.
Beacon Interval
This setting provides the option to set the time between each beacon send.
Available options are: 100ms, 250ms and 500ms.
DTIM
This setting provides the option to set the frequency for beacon to include
Delivery Traffic Indication Message, DTIM. The interval unit is in millisecond.
RTS Threshold
This setting provides the option to set the minimum packet size for the unit to
send an RTS using the RTS/CTS handshake. Setting zero would disable this
feature.
Slot Time
This setting provides the option to modify the unit wait time before it transmits.
The default value is 9
μs.
ACK Timeout
This setting provides the option to set the wait time to receive acknowledgement
packet before doing retransmission. The default value is 48μs.
Frame Aggregation
With this feature enabled, throughput will be increased by sending two or more
data frames in a single transmission.
Frame Length
This option is only available when Frame Aggregation is enabled. It specifies
the frame length for frame aggregation. By default, it is set as 50000.
Web Administration Settings
Enable
Check the box
to allow Peplink Balance to manage the web admin access
information of the Pepwave AP One.
Web Access Protocol
This option specifies the web access protocol used for accessing the web admin
of Pepwave AP One. The two available options are HTTP and HTTPS.
Management Port
This is to specify the management port used for accessing the device.
HTTP to HTTPS
Redirection
This option will be available if you have chosen HTTPS as the Web Access
Protocol. With this enabled, any HTTP access to the web admin will b
e redirect
to HTTPS automatically.
Admin User Name
This specifies the administrator username of the web admin. It is set as admin
by default.
Admin Password
This field allows you to specify a new administrator password. You may also
click the Generate button and let the system generate a random password
automatically.