User Manual

USER MANUAL

Peplink Balance Series

19.2 PPTP Server

(Available on Peplink Balance 210+)

Peplink Balance has a built-in PPTP Server, which enables remote computers to conveniently and

securely access the local network.

PPTP server setting is located at: Network > Misc. Settings > PPTP Server

Simply check the box to enable the PPTP server function. All connected PPTP sessions are displayed on

the Client List at Status > Client List. Please refer to section 21.3 for details.

PPTP Server Setting

Listen On

This setting is for specifying the WAN connection(s) and IP address(es) where the

PPTP server should listen on.

Authentication

(This option is only applicable on Peplink Balance 380+.)

This setting is for specifying the source of user database for PPTP authentication.

There are three sources can be selected: Local User Accounts, LDAP Server,

RADIUS Server.

Local User Accounts - User accounts are stored in the Peplink Balance

locally. You can add/modify/delete the accounts in the User Accounts table below.

LDAP Server - Authenticate with an external LDAP server. Tested with

OpenLDAP server where passwords are NTLM hashed. Active Directory is not

supported. (You can choose to use RADIUS to authenticate with a Windows

Server.)

RADIUS Server - Authenticate with an external RADIUS server. Tested with

Microsoft Windows Internet Authentication Service, and FreeRADIUS servers

where passwords are NTLM hashed or in plain text.