User Manual

USER MANUAL

Peplink Balance Series

Admin Settings

Router Name

This field allows you to define a name for this Peplink Balance unit.

By default, Router Name is set as Balance_XXXX, where XXXX refers to the last 4 digits of

the serial number of that balance unit.

Admin User Name

It is set as admin by default and is not customizable.

Admin Password

This field allows you to specify a new administrator password.

Confirm Admin

Password

This field allows you to verify and confirm the new administrator password.

Read-only User

Name

It is set as user by default and is not customizable.

User Password

This field allows you to specify a new user password. Once the user password is set, the

feature of read-only user will be enabled.

Confirm User

Password

This field allows you to verify and confirm the new user password.

Web Session

Timeout

This field specifies the number of hours and minutes that a web session can remain idle

before the balance terminates its access to Web Admin Interface.

By default, it is set as 4 hours.

Authentication by

RADIUS

With this box is checked, Web Admin will authenticate using an external RADIUS server.

Authenticated users are treated as "admin" users with full read-write permission.

Local "admin" and "user" accounts will be disabled. When the device is not able to

communicate with the external RADIUS server, local accounts will be enabled

again for emergency access.

Authentication options will be available once this box is checked.