User Manual

USER MANUAL
Peplink Balance Series
http://www.peplink.com - 141 / 182 - Copyright © 2011 Peplink
Auth Protocol
This specifies the authentication protocol used. Available options are MS-CHAP v2 and
PAP.
Auth Server
This specifies the access address of the external RADIUS server.
Auth Server
Secret
This is the secret for accessing the RADIUS server.
Auth Timeout
This option specifies the time value for authentication timeout.
Accounting Server
This specifies the access address of the external Accounting server.
Accounting Server
Secret
This is the secret for accessing the Accounting server.
Network
Connection
This option is for specifying the network connection which will be used for authentication
connection. Users can choose from LAN, WAN and VPN connections.
Security
This option is for specifying the protocol(s) through which the Web Admin Interface can be
accessible:
• HTTP
• HTTPS
• HTTP/HTTPS
Web Admin Port
These fields are for specifying the port number at which the Web Admin Interface can be
accessible.
Web Admin
Access
This option is for specifying the network interfaces through which the Web Admin Interface
can be accessible:
• LAN only
• LAN/WAN
If LAN/WAN is chosen, a WAN Connection Access Settings form will be displayed.
WAN Connection Access Settings
Allowed Source IP
Subnets
This field allows you to restrict web admin access only from defined IP subnets.
• Any - Allow web admin accesses to be from anywhere, without IP address
restriction.
• Allow access from the following IP subnets only - Restrict web admin access
only from the defined IP subnets. When this is chosen, a text input area will be
displayed beneath:
The allowed IP subnet addresses should be entered into this text area. Each IP subnet
must be in form of w.x.y.z/m