User Manual

USER MANUAL
Peplink Balance Series
http://www.peplink.com - 152 / 182 - Copyright © 2011 Peplink
20.8 Configuration
Backing up the Peplink Balance settings immediately after the successful completion of the initial setup is
strongly recommended.
The functionality to download and upload Peplink Balance settings is found at:
System > Configuration
20.8.1 Restore Configuration to Factory Settings
The Restore Factory Settings button is to reset the configuration to the factory default settings. You
have to click the Apply Changes button to make the settings effective.
20.8.2 Downloading Active Configurations
The Download button is to backup the current active settings. Click Download and save the
configuration file.
20.8.3 Uploading Configurations
To restore or change settings based on a configuration file, click Browse to locate the configuration file
on the local computer, and then click Upload.
The new settings can then be applied by clicking the Apply Changes button on the page header, or
discard at the Main page of Web Admin Interface.
20.8.4 Uploading Configuration from High Availability Pair
(Available on Peplink Balance 210+)
In a High Availability (HA) configuration, to quickly load onto the Peplink Balance unit the configuration of
its HA counterpart, click the Upload button.
After loading the settings, configure the LAN IP address of the Peplink Balance unit to be different from
the HA counterpart.