User Manual

USER MANUAL

Peplink Balance Series

21.2 Active Sessions

Information on Active Sessions is at: Status > Active Sessions

This Active Sessions section displays the active inbound / outbound sessions of each WAN connection

on Peplink Balance.

A filter is available to help sort out the active session information. Enter a keyword in the field or check

one of the WAN connection boxes for filtering.

21.3 Client List

The client list table is located at Status > Client List. It lists DHCP client IP address, their Name

(retrieved from DHCP reservation table or defined by users), current Download and Upload rate and

MAC address that the Peplink Balance has offered IP addresses to since it is powered up. Clients can be

imported into DHCP Reservation table by clicking the

button on the right-most column. Further

update the record after the import by going to Network > LAN.

If PPTP Server in section 19.2, Site-to-Site VPN in section 12, or WLAN Controller in section 16 is

enabled, you may see the corresponding connection name would be listed in the field of Name.