User Manual

USER MANUAL

Peplink Balance Series

If Drop-in mode is going to be configured, Setup Wizard will move on to Drop-in Settings.

Select the connection type for WAN connection(s) from the following screen:

Depending on the selection of connection type, further configuration may be needed. For example,

PPPoE and Static IP require additional settings for the selected WAN port. Please refer to Section 10,

Configuration of WAN Interface(s) for details on setting up DHCP, Static IP and PPPoE.

If Mobile Internet Connection is checked, Setup Wizard will move on to Operator settings.

If Custom Mobile Operator Settings is selected, APN parameters are required to be entered. Some

service providers may charge a fee for connecting to a different APN. Please consult the service provider

for the correct settings.