User Manual

USER MANUAL

Peplink Balance Series

11.1.4 GRE Connection

The GRE connection method is suitable if the ISP provides GRE tunnel access through a private network

to the Internet.

GRE Settings

Please refer to the following sections for further details:

• Section 11.1.4.1,

Routing under GRE via Network Address Translation

(NAT)

• Section 11.1.4.2, Routing under GRE via IP Forwarding

The values for DNS server 1 and DNS server 2 are typically determined by, and

can be obtained from the ISP.

DNS Servers

Each ISP may provide a set of DNS servers for DNS lookups. This field specifies

the DNS (Domain Name System) Servers to be used when a DNS lookup is

routed through this connection.

You can input the ISP provided DNS server addresses into the DNS server 1 and

DNS server 2 fields. If no address is entered here, this link will not be used for

DNS lookups.

Please refer to Section 11.2, 11.4, 11.5, and 11.6 for details about WAN Health Check, Bandwidth

Allowance Monitor, Additional Public IP Settings, and Dynamic DNS Settings respectively.