User Manual

USER MANUAL
Peplink Balance Series
http://www.peplink.com - 85 / 182 - Copyright © 2011 Peplink
14.5 Definition of DNS Records
(Available on Peplink Balance 210+)
The built-in DNS Server functionality of Peplink Balance facilitates inbound load balancing. With the
presence of the functionality, NS/SOA DNS records for a domain name can be delegated to Internet IP
address(es) of Peplink Balance. Upon receiving a DNS query, Peplink Balance supports returning, as an
“A” record, the corresponding IP address for the domain name on the most appropriate healthy WAN
connection. It also supports acting as a generic DNS server for hosting “A”, “CNAME”, “MX”, “TXT” and
“NS” records.
For example:
(This example is for illustration only; the actual resolution that takes place in implementation will likely be
different.)
The DNS resolution of the domain name www.mycompany.com is delegated to the WAN2 Internet IP
addresses of Peplink Balance.
Upon receiving the DNS query, Peplink Balance returns, as an “A” record, the IP address for
www.mycompany.com on WAN1 because WAN1 is the most appropriate healthy link.
The settings for defining the DNS records to be hosted by Peplink Balance are located at: Network >
Inbound Access > DNS Settings
DNS Settings
DNS Server
This setting specifies the WAN IP addresses on which the DNS server of Peplink Balance
should listen.
If no addresses are selected, the Inbound Link Load Balancing feature will be disabled;
Peplink Balance will not respond to DNS requests.
To specify and/or modify the IP addresses on which the DNS Server should listen, click the
Edit button that corresponds to DNS Server Listens on, and the following screen is
displayed:
To specify the Internet IP addresses on which the DNS Server should listen, select the
WAN connection by checking the appropriate boxes and the IP addresses associated with
the WAN connections by highlighting the appropriate items in the list. (Multiple items in the
list can be selected by holding CTRL and clicking on the items.)
Click Save to save the settings when configuration is complete.