User's Manual

http://www.pepwave.com
102
Copyright @ 2012 Pepwave
18.6 SNMP
SNMP or Simple Network Management Protocol is an open standard that can be used to collect
information from the Pepwave MAX Mobile Router.
SNMP configuration is located at System > SNMP:
SNMP Settings
SNMP Device
Name
This field shows the router name defined in System > Admin Security.
SNMP Port
This option specifies the port which SNMP used. The default port is set as 161.
SNMPv1
This option allows you to enable SNMP version 1.
SNMPv2
This option allows you to enable SNMP version 2.
SNMPv3
This option allows you to enable SNMP version 3.
To add a community for either SNMPv1 or SNMPv2, click the Add SNMP Community button in the
Community Name table, upon which the following screen will be displayed: