User's Manual

http://www.pepwave.com

5.3 Configuring the Network Environment

To ensure that Pepwave MAX works properly in the LAN environment and can access the Internet via the

WAN connections, please refer to the following setup procedures:

 LAN Configuration

For basic configuration, refer to Section 6, Connecting to Web Admin Interface.

For advanced configuration, go to Section 7, Configuration of LAN Interface(s).

 WAN Configuration

For basic configuration, refer to Section 6, Connecting to Web Admin Interface.

For advanced configuration, go to Section 8, Configuration of WAN Interface(s).

5.4 Mounting the Unit

5.4.1 Wall Mount

Pepwave MAX can be mounted on the wall by screwing. After adding the screw on the wall, slide the

MAX in the screw whole socket as indicated below.

Recommeneded Screw Specification: M3.5 x 20mm, Head Diameter 6mm, Head Thickness 2.4mm

Wall Mount

Screw Socket

Wall Mount

Screw Socket