User's Manual

http://www.pepwave.com

12.2.3 Algorithm: Enforced

This setting specifies the WAN connection usage to be applied on the specified IP Protocol & Port, and is

applicable only when the Algorithm is set to Enforced.

Matching traffic will be routed through the specified WAN connection regardless of the connection’s

health check status.

Starting from firmware 5.2, outbound traffic can be enforced to go through a specified SpeedFusion

connection.

12.2.4 Algorithm: Priority

This setting specifies the priority of the WAN connections to be utilized to route the specified network

service. The highest priority WAN connection available will always be used for routing the specified type

of traffic. A lower priority WAN connection will be used only when all higher priority connections have

become unavailable.

Starting from firmware 5.2, outbound traffic can be prioritized to go through SpeedFusion

connection(s).

By default, VPN connections are not included in the priority list.

Tip

Configure multiple distribution rules to accommodate different kinds of services.