User's Manual

http://www.pepwave.com

The traffic matching this rule will be routed through the healthy WAN connection that is selected in the

field Connection and has the lowest latency. Latency checking packets are issued periodically to a nearby

router of each WAN connection to determine its latency value. The latency of a WAN is the packet round

trip time of the WAN connection. Additional network usage may be incurred as a result.

Tip

The round trip time of a “6M down / 640k up” link can be higher than that of a “2M down / 2M up” link. It is because

the overall round trip time is lengthened by its lower upstream bandwidth despite of its higher downlink speed.

Therefore this algorithm is good for two scenarios:

- All WAN connections are symmetric; or

- A latency sensitive application requires to be routed through the lowest latency WAN regardless the

WAN’s available bandwidth.

12.2.8 Expert Mode

Expert Mode is also available for advance users. Click the help test balloon and click the link turn on

Expert Mode to switch on the feature.

Under Expert Mode, a special rule - "SpeedFusion

Routes" is displayed on the Custom Rules table. It

represents all SpeedFusion

routes learned from remote VPN peers. By default, this bar is on the top of

all custom rules. That means traffic for remote VPN subnets will be routed to its corresponding VPN

peer. You can create custom Priority or Enforced rules and move them above the bar to override the

SpeedFusion

Routes.

Upon disabling the Expert Mode, all rules above the bar will be deleted.