User's Manual

http://www.pepwave.com

13.2 UPnP / NAT-PMP Settings

UPnP and NAT-PMP are network protocols which allow a computer on the LAN to automatically configure

the router to allow parties on the WAN to connect to itself. In this way, the process of inbound port

forwarding is automated.

When a computer creates a rule using these protocols, the specified TCP/UDP port of all WAN

connections' default IP address will be forwarded.

Check the corresponding box(es) to enable UPnP and/or NAT-PMP. Enable these features only if you

trust the computers on the LAN.

A table listing all the forwarded ports under these two protocols can be found at Status > UPnP / NAT-

PMP.