User's Manual

http://www.pepwave.com

Interface can be accessible:

 LAN only

 LAN/WAN

 If LAN/WAN is chosen, a WAN Connection Access Settings form will be

displayed.

WAN Connection Access Settings

Allowed Source

IP Subnets

This field allows you to restrict web admin access only from defined IP subnets.

 Any - Allow web admin accesses to be from anywhere, without IP address

restriction.

 Allow access from the following IP subnets only - Restrict web admin access

only from the defined IP subnets. When this is chosen, a text input area will be

displayed beneath:

The allowed IP subnet addresses should be entered into this text area. Each IP subnet

must be in form of w.x.y.z/m

Where w.x.y.z is an IP address (e.g. 192.168.0.0), and m is the subnet mask in CIDR

format, which is between 0 and 32 inclusively. For example: 192.168.0.0/24

To define multiple subnets, separate each IP subnet one in a line. For example:

 192.168.0.0/24

 10.8.0.0/16

Allowed WAN IP

Address(es)

This is to choose which WAN IP address(es) the web server should listen on.