User's Manual

Pepwave Routers User Manual

http://www.pepwave.com

148

23.6 UPnP / NAT-PMP

The table that shows the forwarded ports under UPnP and NAT-PMP protocols is

located at Status>UPnP/NAT-PMP. This section appears only if you have enabled

UPnP / NAT-PMP as mentioned in Section 16.1.1.

Click to delete a single UPnP / NAT-PMP record in its corresponding row. To

delete all records, click Delete All on the right-hand side below the table.

Important Note

UPnP / NAT-PMP records will be deleted immediately after clicking the button or Delete All, without the

need to click Save or Confirm.