User's Manual

Pepwave Routers User Manual

http://www.pepwave.com

128

If LAN/WAN is chosen, the WAN Connection Access Settings form will be displayed.

WAN Connection Access Settings

Allowed

Source IP

Subnets

This field allows you to restrict web admin access only from defined IP subnets.

• Any - Allow web admin accesses to be from anywhere, without IP address

restriction.

• Allow access from the following IP subnets only - Restrict web admin access

only from the defined IP subnets. When this is chosen, a text input area will be

displayed beneath:

The allowed IP subnet addresses should be entered into this text area. Each IP subnet

must be in form of w.x.y.z/m, where w.x.y.z is an IP address (e.g., 192.168.0.0), and m is

the subnet mask in CIDR format, which is between 0 and 32 inclusively (For example,

192.168.0.0/24).

To define multiple subnets, separate each IP subnet one in a line. For example:

• 192.168.0.0/24

• 10.8.0.0/16

Allowed WAN

IP Address(es)

This is to choose which WAN IP address(es) the web server should listen on.