User's Manual

Pepwave MAX and Surf User Manual
http://www.pepwave.com 8 Copyright @ 2016 Pepwave
3 Product Features
Pepwave routers enable all LAN users to share broadband Internet connections, and
they provide advanced features to enhance Internet access. Our Max BR wireless
routers support multiple SIM cards. They can be configured to switch from using one
SIM card to another SIM card according to different criteria, including wireless network
reliability and data usage.
Our MAX HD series wireless routers are embedded with multiple 4G LTE modems, and
allow simultaneous wireless Internet connections through multiple wireless networks.
The wireless Internet connections can be bonded together using our SpeedFusion
technology. This allows better reliability, larger bandwidth, and increased wireless
coverage are comparing to use only one 4G LTE modem.
Below is a list of supported features on Pepwave routers. Features vary by model. For
more information, please see peplink.com/products.
3.1 Supported Network Features
3.1.1 WAN
 Ethernet WAN connection in full/half duplex
 Static IP support for PPPoE
 Built-in HSPA and EVDO cellular modems
 USB mobile connection(s)
 Wi-Fi WAN connection
 Network address translation (NAT)/port address trans
lation (PAT)
 Inbound and outbound NAT mapping
 IPsec NAT-T and PPTP packet passthrough
 MAC address clone and passthrough
 Customizable MTU and MSS values
 WAN connection health check
 Dynamic DNS (supported service providers: changeip.com, dyndns.org, no-
ip.org, tzo.com and DNS-O-Matic)
 Ping, DNS lookup, and HTTP-based health check
3.1.2 LAN
 Wi-Fi AP
 Ethernet LAN ports
 DHCP server on LAN
 Extended DHCP option support
 Static routing rules
 VLAN on LAN support