User's Manual

USER MANUAL

Peplink Balance Series

WAN Connection Settings

WAN Connection

Name

This field is for defining a name to represent this WAN connection.

Network Mode

Users have to specify the Network they are on accordingly.

Routing Mode

This option allows you to select the routing method to be used in

routing IP frames via the

WAN connection. The mode can be either NAT (Network Address Translation) or IP

Forwarding. Click the button to enable IP Forwarding.

Cellular Settings

3G/2G

Band selection to restrict cellular on particular band. Click on the

button to enable the

selection of specific bands.

Data Roaming

This checkbox enables data roaming on this particular SIM card. Please check your

service provider’s data roaming policy before proceeding.

Operator Settings

This setting applies to 3G / EDGE / GPRS modem only. It does not apply to EVDO / EVDO

Rev. A modem.

This allows you to configure the APN settings of your connection. If Auto is selected, the

mobile operator should be detected automatically. The connected device will be

configured and connection will be made automatically afterwards. If there is any difficulty

in making connection, you may select Custom to enter your carrier’s APN, Login,

Password, and Dial Number settings manually. The correct values can be obtained from