User's Manual

User Manual
http://www.pepwave.com
10
Copyright © 3/27/14 Pepwave
4.3 AP One mini
Front View Rear Panel View
Connectors
USB
Reserved for future functionality.
Power Connector
DC 12V power input for use with the supplied power adapter.
WAN
10/100BaseT Ethernet connector, normally connected to a back haul
network.
Antenna
(Right Connector)
RP-SMA connector for attaching the antenna.
LED Indicators
PWR
OFF – Power is off.
ON – Power is on.
RDY
RED – Device is not booted.
AMBER – Device is not booted.
ENET
OFF – Ethernet port is not connected.
ON – Ethernet port is connected.
OFF – No client is associated.
ON – Clients are associated.
Each bar indicates an increase of up to 10 connected clients. The shortest
bar indicates from one to 10 clients while the longest indicates 31 or more
clients.