User's Manual
User Manual
http://www.pepwave.com
12
Copyright © 3/27/14 Pepwave
LED Indicators
OFF – Unit is initializing.
ON – Unit is ready.
LAN
OFF – Ethernet port is not connected.
ON – Ethernet port is connected.
Indicate the signal strength.
Mounting the Unit
Pepwave AP One Flex can be mounted on a flat surface or a pole using the wall/pole mount
(available separately).
Pole/Wall Mount
Pole/Wall Mount
with Ball Joint
Pole/Wall Mount
Flexible ball joint to
connect to AP One Flex
For pole mount with
metallic strips