User's Manual

User Manual

http://www.pepwave.com

5.1 Installation Procedures

1. Attach the antenna to your Pepwave access point.

2. Connect the Ethernet port on the unit with the backbone network using an Ethernet

cable. The port should auto sense whether the cable is straight-through or crossover.

3. Connect the power adapter to the power connector of the unit. Plug the power adapter

into a power source.

4. Wait for the status LED to turn green.

5. Connect a PC to the backbone network. Configure the IP address of the PC to be any IP

address between 192.168.0.4 and 192.168.0.254, with a subnet mask of 255.255.255.0.

6. Using Microsoft Internet Explorer 6 or above, Mozilla Firefox 2.0 or above, or Google

Chrome 2.0 or above, connect to https://192.168.0.3.

7. Enter the default admin login ID and password, admin and public respectively.

After logging in, the following Information main page appears. Click System, located under

Configure on the left, to begin setting up your access point.