User's Manual

User Manual
http://www.pepwave.com
28
Copyright © 3/27/14 Pepwave
7.1.2 Advanced
System Settings - Advanced
Management VLAN
ID
VLAN ID from which management sessions are allowed. Establishment of
management sessions is restricted to the specified VLAN ID. If
Management VLAN ID is set to 0, management sessions can be
established without VLAN ID restrictions. Default value is 0, which means
that tagging is disabled, not that management sessions will be tagged
with 0.
NTP Server
Network Time Protocol (NTP) Server hostname used when synchronizing
your access point’s system clock. Default value is pool.ntp.org.
Scheduled Reboot
Automatic reboot schedule. Check Enable, then set the reboot schedule
using the Schedule, Day, and Time drop-down menus.
Ethernet
Speed/Duplex
Ethernet send and receive speed.
Controller IP
Address / Domain
Name
IP address or domain name of an optional Peplink Balance AP Controller.
Leave this field blank if not using a Balance AP Controller.
AP Mode
Access point operation mode. Choose Bridge or Router. When Router is
selected, the following Manual Router Settings will be available: