User's Manual

User Manual

http://www.pepwave.com

7.1.2.1 Manual Router Settings

Manual Router Settings are available only when AP Mode in Advanced System Settings is

set to Router. When using Router mode, your Pepwave access point can be used as a DHCP

server for devices located behind it in the network.

Manual Router/DHCP Server Parameters

LAN IP

DHCP server IP address.

LAN Subnet Mask

Subnet mask of the DHCP server.

DHCP Server

Check to enable the DHCP server feature of your Pepwave access point.

The following options will be enabled once you have checked and

enabled DHCP Server.

IP Start Range

First address in the range of IP addresses assigned to DHCP clients.

IP Stop Range

Last address in the range of IP addresses assigned to DHCP clients.

Subnet Mask

Subnet mask used by DHCP clients.

Broadcast Address

Broadcast address used by DHCP clients.

Gateway

Default routing gateway used by DHCP clients.

DNS 1

IP address of the primary DNS server offered to DHCP clients.

DNS 2

IP address of the secondary DNS server offered to DHCP clients.

DNS 3

IP address of the tertiary DNS server offered to DHCP clients.