User's Manual

User Manual
http://www.pepwave.com
32
Copyright © 3/27/14 Pepwave
LAN
LAN IP
IP address of your Pepwave access point.
LAN Subnet Mask
Specifies the number of clients that can connect to your access point.
DHCP Server
Check to enable the DHCP server feature of your access point. Enabling
DHCP is the best option for most users. The following options will be
enabled once you have checked and enabled DHCP Server.
IP Start Range
First address in the range of IP addresses assigned to DHCP clients.
Default is 192.168.1.100
IP Stop Range
Last address in the range of IP addresses assigned to DHCP clients.
Default is 192.168.1.200.
Subnet Mask
Number of clients that can connect to your access point. This value
should match the value in LAN Subnet Mask. Default is 255.255.255.0.
Broadcast Address
Broadcast address used by DHCP clients.
Gateway
Default routing gateway used by DHCP clients.
DNS 1
IP address of the primary DNS server offered to DHCP clients.
DNS 2
IP address of the secondary DNS server offered to DHCP clients.
DNS 3
IP address of the tertiary DNS server offered to DHCP clients.
Lease Time
Length of time that an IP address of a DHCP client remains valid. When
lease time has expired, the assigned IP address is no longer valid, and
renewal of the IP address assignment is required.
Reservation
Assigns an IP address to a specific MAC address. To add a new
reservation, enter MAC address and IP Address, then click Add. To
remove a reservation from the displayed list, click Delete.