User's Manual

User Manual
http://www.pepwave.com
37
Copyright © 3/27/14 Pepwave
7.3.1 Wireless Network Details - Basic
Wireless Network Details - Basic
Enable
Select Yes to enable the virtual AP. Select No to disable. The virtual AP
is enabled by default.
Wireless Network
SSID
SSID of the virtual AP as it appears to Wi-Fi clients.
Broadcast SSID
Check Enable to allow Wi-Fi clients to scan the virtual AP’s ESSID. Note
that the BSSID (i.e., the MAC address of the virtual AP) cannot be hidden
from the scan. To associate with the virtual AP, clients must specify the
correct ESSID upon association. Broadcast SSID is enabled by default.
Security Level
Configures wireless authentication and encryption methods used by the
virtual AP. Available options are Open - No Encryption, Static WEP,
802.1X, WPA-TKIP, and WPA2-AES:CCMP. For details on setting
encryption options, please see Static WEP Parameters, 802.1x
Parameters, WPA Parameters in the following sections.