User's Manual

User Manual
http://www.pepwave.com
38
Copyright © 3/27/14 Pepwave
7.3.1.1 Static WEP Parameters
The configuration of Static WEP parameters enables pre-shared WEP key encryption. Please
note that static WEP offers weak security and does not support authentication.
Static WEP Parameters
Key Size
Choose 40 bits (64-bit WEP) or 104 bits (128-bit WEP). When using the
WDS setting, 128 bits will also be available.
Key Format
Choose ASCII or HEX.ASCII can be applied only to encryption keys that
are manually entered. HEX can be applied to encryption keys that are
manually entered or automatically generated.
Passphrase
Combination of words and characters used to generate an encryption
key. Click Generate Key to create the key.
Encryption Key
User-specified encryption key value. For ASCII format, key length is
either 5 or 13. For HEX format, key length is either 10 or 26.
Shared Key
Authentication
Check to enable shared key authentication. Default is disabled, meaning
open authentication is used.