User's Manual

User Manual
http://www.pepwave.com
40
Copyright © 3/27/14 Pepwave
7.3.3.3 WPA parameters
The configuration of WPA parameters enables WPA-TKIP, WPA2-AES:CCMP, and WPA-TKIP
and WPA2-AES:CCMP. To enable WPA and WPA-PSK, configure WPA-TKIP. To enable
WPA2 and WPA2-PSK, configure WPA2-AES. When WPA or WPA2 is configured, RADIUS-
based 802.1x authentication with TKIP encryption method is enabled. When using this
configuration, Pre-Shared Key should be disabled.
The security level of this method is known to be very high.
When WPA-PSK or WPA2-PSK is configured, a Pre-Shared Key or Passphrase is used for
data encryption and authentication. When using this configuration, Pre-Shared Key should be
enabled. Key length must be from 8 to 63 characters.
The security level of this method is known to be high.