User's Manual

User Manual

http://www.pepwave.com

3. To find your wireless network, click the Wireless tab. Next, check Wireless Networks,

then click More….

4. Click the name of the SSID you have set up. Note: If you have not added a wireless

network, click New wireless network... to create one.

5. On the Edit a wireless network page, click the Web Portal Login tab. Click Enable to

enable Web portal logins. Click OK to continue.

6. Click Save to save your changes.

7. Click the Web Admin tag and setup the web access as follows:

Web Access Protocol: HTTPS

Management Port: 443

HTTP to HTTPS Redirection: Enable

8. Click Save to save your settings.

Step Two: Create Guest Accounts and Set Up a Portal Page

9. Go to Guest Portal and Accounts by clicking on the link on the left.

10. You can generate more than one account at one time. Change the parameters in No.

of accounts to be generated, Username prefix, Sequence number suffix, and Time

Quota. Default time limit is set to 24 hours. You can change the time limit.

11. Click Generate.

12. You should now have some guest accounts generated as shown Unused Guest

Accounts. You can download account information in CSV format by clicking All,

Generated today, or Not generated today.

13. A standard portal page will be generated automatically after guest accounts are

generated (http://guest.pepwave.com). You can customize the portal page by clicking

on the Portal Page Customization tab, where you can upload your logo image and

enter a message for guests. Preview your portal page, then publish it.

Your guest accounts and portal page are now ready for use.