User's Manual

User Manual

http://www.pepwave.com

Wireless Network Details - Guest Protect

Block LAN Access

Enables settings to Block all private IPs / Custom Subnet / Block

Exception. If you have selected Block all private IPs or Custom Subnet,

these IPs / subnets will be blocked no matter what Firewall Mode is

selected. When Block Exception is selected, IPs entered will be excluded

from the blocking list.

 Private IP – Blocks common private IPs:

o 192.168.0.0 – 192.168.255.255

o 172.16.0.0 – 172.31.255.255

o 10.0.0.0 – 10.255.255.255

 Custom Subnet – Blocks user-specified IP subnets.

 Block Exception – Blocks all IPs except those specified.

Block

SpeedFusion™

Block SpeedFusion™ traffic.

Bandwidth

Management

Enables settings to control upstream and downstream limits. You can

control bandwidth usage Per VAP or Per Client.

Upstream Limit

Upstream bandwidth limit in kbps. Default is 0: Unlimited.

Downstream Limit

Downstream bandwidth limit in kbps. Default is 0: Unlimited.

Maximum Number

of Clients

Maximum number of clients that can be simultaneously connected to your

Pepwave access point. Default is 0: unlimited.

Firewall Mode

Enables one of three firewall modes: Lockdown, Flexible, and Disable.

Lockdown – Block all traffic except pre-defined exceptions.

Flexible – Allow all traffic except pre-defined exceptions.

Disable – Firewall mode is disabled. (Default)

Exceptions

Specifies exceptions when Lockdown or Flexible Firewall Mode is

selected. Exceptions can be added by type, including Port, Domain, IP

Address, MAC Address, and Application/Service. Click Apply to save

changes and make them active.