User's Manual

User Manual
http://www.pepwave.com
50
Copyright © 3/27/14 Pepwave
7.4.1 Radio Settings
Advanced Wireless Settings - Radio Settings
Protocol
802.11bgn: Pepwave access point accepts 802.11b, 802.11g, and 802.11n
client association requests.
802.11b/g: Pepwave access point accepts both 802.11b and 802.11g client
association requests.
802.11b Only: Pepwave access point accepts only 802.11b client
association requests.
802.11g Only: Pepwave access point accepts only 802.11g client
association requests.
802.11n Only: Pepwave access point accepts only 802.11n client
association requests.
Operating
Country
Note: The country code selection is for non-US model only and is not available
to all US model. Per FCC regulation, all WiFi product marketed in US must
fixed to US operation channels only.
Channel
Bonding
Only available when Protocol is set to 802.11bgn or 802.11n Only. Choose
20MHz, 20/40MHz, or 40MHz.
Channel
802.11 channel. Choose from 1 to 11. In North America and Europe, choose
from 1 to 13. (Channel 14 is only available in Japan when using the 802.11b
protocol.) If Auto is set, the system scans channels based on the scheduled
time and automatically chooses the most suitable channel.
Power Boost
Enables the power boost feature, which maximizes your access point’s Wi-Fi
capacity. Please enable only if local regulations permit.
Tx Output
Power
Choose Max, High, Medium, or Low transmission output power.