User's Manual

User Manual
http://www.pepwave.com
57
Copyright © 3/27/14 Pepwave
IP Address Mode
IP Address Mode options are Automatic and Manual. Automatic: The
IP address of your access point is acquired from a DHCP server on the
Ethernet segment. Manual: A user-specified IP address is used for your
access point.
IP Address
User-specified IP address for use with Manual IP Address Mode, above.
Subnet Mask
Subnet mask used by your access point.
Data Port
This field specifies the outgoing UDP port number for transporting VPN
data. If Default is selected, port 4500 will be used by default. Port 32015
will be used if the remote unit's firmware version is prior to 5.4 or the port
4500 is unavailable for use. If Custom is selected, you can input a
custom outgoing port number between 1 and 65535.