User's Manual

User Manual
http://www.pepwave.com
59
Copyright © 3/27/14 Pepwave
7.7.2 SNMPv1 / SNMPv2 Communities
Using SNMPv1/v2 communities, access rights can be controlled. Click New to add a new SNMP
v1/v2 community, or click Edit to change the settings of an existing community. Click Remove
to delete a community.
SNMPv1 / SNMPv2 Community - Settings
Community Name
Password for getting or setting SNMP values.
IP Address and IP
Mask
IP and subnet address that is allowed to access the SNMP server.
Access Mode
Choose Read Only or Read & Write.
Status
Enable or Disable this community.