User's Manual

User Manual
http://www.pepwave.com
61
Copyright © 3/27/14 Pepwave
SNMPv3 User - Settings
SNMPv3 User Name
User ID allowed to access the SNMP agent.
Authentication
Protocol
Protocol for authenticating the user. Choose HMAC-MD5 or HMAC-SHA.
Authentication
Password
Users provided with a correct password will be granted the right to access
the SNMP agent.
Privacy Protocol
Encryption method to be used in SNMPv3 communication. Choose None
or CBC-DES.
Privacy Password
Shown only if CBC-DES is chosen as the Privacy Protocol. This is the
key for decrypting encrypted data.
Access Mode
Grant Read or Read & Write access to this user.
Status
Enable or Disable this user.
7.8 Web Administration
Select Web Administration, located under Configure on the left, to begin configuring the Web
management interface.
7.8.1 Web Access Settings
Web Access Settings configures the protocol and TCP port number of the web server. If
HTTPS is enabled, the HTTP to HTTPS Redirection option will be provided.