User's Manual

User Manual

http://www.pepwave.com

9.2 Firmware

Click Firmware, located under Commands on the left, to check firmware versions, select a boot

ROM, and update your Pepwave access point’s firmware.

Commands – Upgrade Firmware

Firmware Version

The firmware version loaded into the flash partitions.

Flash Status

The firmware status on the flash partitions.

Boot from

Indicates which flash partition boots up the system.

Firmware Upgrade

Target

Indicates which flash partition will be upgraded with the next firmware

upgrade.

Firmware Upgrade

Select Online, then click Check to look for firmware upgrade files online.

Select Manual to choose a downloaded firmware update. In either case, a

reboot is required after upgrading the firmware.