User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com

104

Inbound

Mappings

This setting specifies the WAN connections and corresponding WAN-specific Internet IP

addresses on which the system should bind. Any access to the specified WAN

connection(s) and IP address(es) will be forwarded to the LAN host. This option is only

available when IP Address is selected in the LAN Client(s) field.

Note that inbound mapping is not needed for WAN connections in drop-in mode or IP

forwarding mode. Also note that each WAN IP address can be associated to one NAT

mapping only.

Outbound

Mappings

This setting specifies the WAN IP addresses that should be used when an IP connection

is made from a LAN host to the Internet. Each LAN host in an IP range or IP network will

be evenly mapped to one of each selected WAN's IP addresses (for better IP address

utilization) in a persistent manner (for better application compatibility).

Note that if you do not want to use a specific WAN for outgoing accesses, you should still

choose default here, then customize the outbound access rule in the Outbound Policy

section. Also note that WAN connections in drop-in mode or IP forwarding mode are not

shown here.

Click Save to save the settings when configuration has been completed.

Important Note

Inbound firewall rules override the Inbound Mappings settings.