User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com

127

Current SSID information appears in the SSID section. To edit an existing SSID, click its

name in the list. To add a new SSID, click Add. Note that the following settings vary by

model.

SSID Settings

SSID

This setting specifies the SSID of the virtual AP to be scanned by Wi-Fi clients.

Enable

Select Yes to enable the virtual AP.

VLAN ID

This setting specifies the VLAN ID to be tagged on all outgoing packets generated

from this wireless network (i.e., packets that travel from the Wi-Fi segment through

the Pepwave AP One unit to the Ethernet segment via the LAN port). The default

value of this setting is 0, which means VLAN tagging is disabled (instead of tagged

with zero).

Broadcast SSID

This setting specifies whether or not Wi-Fi clients can scan the SSID of this wireless

network. Broadcast SSID is enabled by default.

Data Rate

Select Auto to allow the Pepwave router to set the data rate automatically, or select

Fixed and choose a rate from the displayed drop-down menu.

Multicast Filter

This setting enables the filtering of multicast network traffic to the wireless SSID.

Multicast Rate

This setting specifies the transmit rate to be used for sending multicast network

traffic. The selected Protocol and Channel Bonding settings will affect the rate