User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com

5.2 Constructing the Network

At a high level, construct the network according to the following steps:

1. With an Ethernet cable, connect a computer to one of the LAN ports on the

Pepwave router. Repeat with different cables for up to 4 computers to be

connected.

2. With another Ethernet cable or a USB modem/Wi-Fi antenna/PC

Card/Express Card, connect to one of the WAN ports on the Pepwave router.

Repeat the same procedure for other WAN ports.

3. Connect the power adapter to the power connector on the rear panel of the

Pepwave router, and then plug it into a power outlet.

The following figure schematically illustrates the resulting configuration: