User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com

9.1 Ethernet WAN

From Network>WAN, choose a WAN connection and then click Details.

WAN Port (Section 1)

WAN

Connection

Name

Enter a name to represent this WAN connection.

Connection

Method

There are three possible connection methods for Ethernet WAN:

 DHCP

 Static IP

 PPPoE

The connection method and details are determined by, and can be obtained from, the ISP.

See the following sections for details on each connection method.

Routing Mode

This field shows that NAT (network address translation) will be applied to the traffic routed

over this WAN connection. IP Forwarding is available when you click the link in the help

text.

Address/Subnet

Mask/Default

Gateway

Enter the WAN IP address and subnet mask, as well as the IP address of the default

gateway, in these fields.

Hostname

Enter a hostname for this WAN port if needed.

DNS Servers

Select a DNS server for this port to use. This port can either be automatically selected or

manually designated.