User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com

9.3 Wi-Fi WAN

To access Wi-Fi WAN settings, click Network>WAN>Details.

Wi-Fi Connection Settings

WAN Connection

Name

Enter a name to represent this WAN connection.

Standby State

This setting specifies the state of the WAN connection while in standby. The available

options are Remain Connected (hot standby) and Disconnect (cold standby).

MTU

This setting specifies the maximum transmission unit. By default, MTU is set to Custom

1440. You may adjust the MTU value by editing the text field. Click Default to restore the

default MTU value. Select Auto and the appropriate MTU value will be automatically

detected. The auto-detection will run each time the WAN connection establishes

Reply to ICMP

PING

If this setting is disabled, the WAN connection will not respond to ICMP ping requests. By

default, this setting is enabled.

Wi-Fi WAN Settings

Channel

Selection

Determine whether the channel will be automatically selected. If you select custom, the

following table will appear: