User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com

104

16 NAT Mappings

NAT mappings allow IP address mapping of all inbound and outbound NAT’dt raffic to

and from an internal client IP address. Settings to configure NAT mappings are located

at Advanced>NAT Mappings.

To add a rule for NAT mappings, click Add NAT Rule.

NAT Mapping Settings

LAN

Client(s)

NAT mapping rules can be defined for a single LAN IP Address, an IP Range, or an IP

Network.

Address

This refers to the LAN host’s private IP address. The system maps this address to a

number of public IP addresses (specified below) in order to facilitate inbound and

outbound traffic. This option is only available when IP Address is selected.

Range

The IP range is a contiguous group of private IP addresses used by the LAN host. The

system maps these addresses to a number of public IP addresses (specified below) to

facilitate outbound traffic. This option is only available when IP Range is selected.

Network

The IP network refers to all private IP addresses and ranges managed by the LAN host.

The system maps these addresses to a number of public IP addresses (specified below)

to facilitate outbound traffic. This option is only available when IP Network is selected.