User's Manual

Pepwave MAX and Surf User Manual

http://www.pepwave.com

114

18.2 Web Blocking

18.2.1 Web Blocking

Enter an appropriate website address, and the Pepwave router will block and disallow

LAN/PPTP/SpeedFusion

peer clients to access these websites. Exceptions can be

added using the instructions in Sections 18.2.2 and 18.2.3.

You may enter a wildcard ".*" at the end of a domain name to block any web site with a

host name having the domain name in the middle. For example, If you enter foobar.*,

www.foobar.com, www.foobar.co.jp, and foobar.co.uk will be blocked. Placing the

wildcard in any other position is not supported. The Pepwave router will inspect and

look for blocked domain names on all HTTP traffic. Secure web (HTTPS) traffic is not

supported.

18.2.2 Exempted User Groups

Check and select pre-defined user group(s) who can be exempted from the access

blocking rules. User groups can be defined at QoS>User Groups section. Please refer

to Section 17.1 for details.

18.2.3 Exempted Subnets

With the subnet defined in the field, clients on the particular subnet(s) can be exempted

from the access blocking rules.

18.3 OSPF & RIPv2

The Peplink Balance supports OSPF and RIPv2 dynamic routing protocols. Click the

Network tab from the top bar, and then click the OSPF & RIPv2 item on the sidebar to

reach the following menu: